How to fix a hole in a puffer jacket

If you’re dealing with a dime-sized hole , Zwiers says that the most inexpensive and effective option is to apply Seam Grip to the outer surface of the jacket fabric to bond the torn edges to. How to repair a hole or tear in your down jacket or sleeping bag using our self-adhesive repair patches. For a quick patch on the fly, apply some Tenacious Tape.

Never pull the feathers out—always push the feathers back in. Pulling the feathers out will pull more feathers out.

If you are looking for a long-term solution, you will most likely need a baffle repair. While a baffle repair is challenging, i. Apply pressure to the patch , working from the center out to remove any air bubbles. This protects the edges of the hole from pulling loose.

Wash your jacket in cold water to extend the life of the patch. If it peels off over time, remove it and apply another one. The cost for repairs depends on whether it’s just to fix that rip, or if you need to fill in your jacket or sleeping bag with new down.

It’s definitely cheaper than buying a new jacket.

And your down product will look like new. Use our quick and easy self adhesive repair patches. I had a rip in my silnylon tent and covered it with a small patch of nylon and put seam sealer over it on the inside and out, without sewing on the patch.

My immediate and quick fix was of course Duct tape, but to me that’s more of a band aid than an actual repair job. When I got home and was researching how to more permanently repair the hole , I came across a few different methods. One was using a product called tenacious tape, the other was using seam grip. Maybe I’m a little but vain, but after looking at the two options, I thought they.

Transition To The Holiday Season Seamlessly With Our New Collection. Proportioned to Fit You Perfectly. Give the Gift that Always Fits. Order Gift Cards and E-Gift Cards. Apply patch and your jacket will be repaired in minutes!

So here are they are - ready to help you make that deliciously simple and satisfying repair. You have four options to repair the rip in your down jacket. It is not advisable to try and repair a large hole or tear with a regular needle and thread since the outer shell of the jacket is quite fragile.

You can return it to the manufacturer for repair. In these situations, the best solution is to send the jacket to an authorized professional.

Depending on the damage, the repair is often a small price to pay compared to replacing the whole jacket. Gluing or taping over the hole in your puffy works much better than sewing (which pokes new holes ), and it lasts much longer than the duct tape patch most people try. Down and synthetic insulation jackets are an investment, so treat yours with TLC.

These are normally much smaller, and only have a few fibers of down or fill material protruding. I have similar holes in my down jacket. I brought it to North Face last year to ask about repairs, and they said normal wear and tear is not covered under their warranty. Place the bottom patch underneath the hole , and run the lines of stitching very close together to completely catch all edges of the hole onto the bottom patch.

Sew the bottom patch into place. Stitch back and forth, and up and down, creating a fabric of stitching across the hole or tear. Get What Is Puffer Jacket. I used some seam seal with it also to glue it down well to the jacket. It is a hole in the back like center in the back it burned through all the way to my skin.

I had the jacket a shirt and a wife beater and it went all the. Baste stitch by hand with a small needle (to prevent leaving visible holes in the fabric) through all layers of the jacket around the original tear. I had my favorite nylon puffer jacket on when making dinner (waiting for the home to heat up) and melted a whole into the sleeve. Down Jacket Leaking Feathers is common. I got the First Ascent Down Microtherm Hooded Down Shirt about months ago, as a versatile insulating layer for traveling.

Keep the iron moving over the area of the patch and you should be OK. Or you can lay a clean cotton or linen tea towel over the patch area and iron through that. If you do this be sure to use enough pressure, and you can turn the heat up higher due to the layer of cotton or linen next to the iron.

Tears should be fixed immediately or they will increase in size and become more difficult to fix. Put an end to leaky feathers once and for all with these pre-cut repair patches. Tenacious Tape Mini repair patches instantly repair rips, tears or holes in clothing and prevent feathers from escaping down puffer jackets and fabrics.

The unique size fits in between down baffles offering. The next time you snag a hole in your down puffer jacket , reach for Tenacious TapeTM Mini by Gear Aid. These pre-cut repair patches are ideal for a down jacket repair or for patching small holes in clothing and gear. The lightweight and convenient pocket pack includes six ready-to-use Tenacious tape.

There is some special clear gortex repair tape that a friend of mine had good success with – gorilla tape worked well on a down jacket I still own – but the repair was on the inside so. Clean the hole thoroughly to remove all dust and loose material. Wear eye protection and a dust mask.